Advertisement
4.8.1
Settings
The settings screen can be accessed by pressing the 'Settings' button on the top left corner of the
home screen. The features available in the settings page are only available through the app and
cannot be changed without being connected to the gauge. (Figure 9). By clicking on the
corresponding buttons, the user can change various aspects of the gauge such as;
a.
Set nominal gauge (Stagger measurement mode) – The stagger measurement shown in
readings will be calculated from the fixed end side of the DLHS gauge and the gauge set
to 1435mm (nominal).
b.
Set measured gauge – The stagger measurement shown in readings will be calculated
from the live gauge recording.
c.
Phone display On/Off – The phone display can be toggled ON or OFF to preserve phone
battery life.
d.
DLHS display On/Off – The DLHS built-in display can be toggled ON & OFF to preserve
device battery life. The built-in display can be turned on when used in standalone mode.
e.
E-mail address – The e-mail address written in this box will receive the recorded files that
are sent through the built-in email functionality in the DLHS app.
Figure 8 – Home screen of DLHS app
10
Advertisement
