Advertisement
2. Place the REFOS unit carefully in the slot provided on gauge foot.
3. The magnets will ensure the device is connected correctly in place if placed slowly. The
REFOS unit may be fitted on either side of the gauge as required (see Figure 3).
4.
The phone holder provided with the DLHS gauge can be fitted on the ball mount present
above the stagger adjustment wheel.
4.3
Operating the Laser in standard mode
1.
Turn on the ABT 8000 by pressing the
a.
After displaying the welcome page, the main page with all the available recording
features will be shown on the built-in screen.
Figure 3 – REFOS unit is held on magnetically
Figure 4 – Built-in display
button on the vertical beam.
6
Advertisement
