Verify the installed transmitter does not physically interfere with any hoses or other tank assemblies.
5
7 Use two
/
in. (16 mm) wrenches to tighten the transmitter, placing one wrench on the transmitter and one
8
wrench on the hose fitting.
To prevent damage to the transmitter and possible loss of function, do not overtighten. Do not use the
transmitter housing to tighten or loosen the transmitter.
Do not grip the regulator or the transmitter to move, carry, or adjust the tank.
8 Ensure the connection between the transmitter and hose fitting is secure before using the device.
You must remove the air spool and reinstall the flow restrictor before installing the transmitter on your tank
regulator.
Diving
WARNING
NOTICE
15