Boot" Tab - Siemens SIMATIC IPC227G Operating Instructions Manual

Configure firmware

2.7 "Boot" tab

2.7 "Boot" tab
Boot behavior of the device, bootable device components (boot media) and boot order.
Calling "Boot" tab
Select: "Setup Utility (Page 9)" > "Boot".
Firmware setting
Quick Boot
Quiet Boot
Network Stack
• PXE Boot capabil-
ity
(This option shows
only when "Net-
work Stack" = Ena-
bled)
Add Boot Options
USB Boot
SATA Boot
NVME Boot
Timeout
EFI (Page 21)
20
Value Setting in
delivery state
IPC227G
IPC277G
Enabled x
Disabled
Enabled x
Disabled
Enabled
Disabled x
Disabled x
UEFI: IPv4
First
Auto x
Last
Enabled
Disabled x
Enabled x
Disabled
Enabled x
Disabled
0 to 1800 0
Meaning
Quick start of the device is enabled.
During the boot procedure, various hardware function tests are
skipped. This shortens the boot procedure.
Quick start of the device is disabled.
The boot logo is displayed during the self-test.
Start information appears in text mode during the self-test.
The UEFI Network Stack for network access under UEFI is availa-
ble.
The UEFI Network Stack for network access under UEFI is not
available. For example, UEFI installation via PXE (Preboot Execut-
able Environment) is not possible.
Booting via PXE (Preboot Executable
Environment) is disabled.
Only UEFI Network Stack is support-
ed.
Only UEFI boot media that support
Internet protocol version 4 are con-
sidered as PXE boot media.
Newly detected boot media are placed at the top of the boot
order.
Newly detected boot media are placed automatically in the boot
order, e.g. dependent on the device path for UEFI boot media.
Newly detected boot media are placed at the bottom of the boot
order.
Booting from USB devices is permitted.
Booting from USB devices is not permitted.
Booting from SATA devices is permitted.
Booting from SATA devices is not permitted.
Booting from NVME devices is permitted.
Booting from NVME devices is not permitted.
Delay time in seconds during booting so that the user has time
to press the hotkey to open the firmware selection menu.
EFI Boot Order Settings
Firmware/BIOS description SIMATIC IPC227G, IPC277G
Operating Instructions, 05/2021, A5E50059883-AA
PXE = Preboot Executable
Environment
Controls the booting of a
boot image that can be
loaded over the network.