Table of Contents
Advertisement
N61e V1.0 or Higher
The N61e provides convenient and professional charging functions, which
are based on different batteries capacity and charging capabilities: FAST/
STD/ SLOW/ STORAGE. Instead of tedious manual setting, the operating
current is fixed at a variant charge rate (C). In the MANU function, you can
adjust the current from -3A to +10 A. The Discharge function is available in
the MANU or STORAGE functions. During operation, the current can be
adjusted except when using Constant Voltage. The detail below refers to
Table.N61e Operating Function Option.
Table. N61e Operating Function Option
Function
Charge
FAST
Rating
Battery
Li-Po
2C
/ Li-Ion
/ Li-FePO4
NiCd / NiMH
1C
Lead-acid
×
For lithium batteries, at STG, the batteries will be charged or discharged to
3.8V. At this point, the pack is approximately half-full, which state of charge
is ideal for long storage periods.
Still for lithium batteries, the FAST function is only recommended to new
chemistry packs which can be to charged up to 2C according to
manufacturer.
Whatever you set, the actual operating current will be limited to Max power,
which is associated with input voltage and no more than 90Watts (15VDC).
70Watts @ 12VDC. Max discharge power is limited to 30Watts.
The ROTATING DIAL and the EXIT BUTTON are multi-purpose controls.
ROTATING DIAL
--Press instantly
Enter into the selected memory on the memory list.
Start or stop editing parameters within a memory.
Start or stop adjusting operating current as charging or discharging.
SLO
STD
STORAGE
W
1C
0.5C
0.5C CHG or
1C DCHG to
3.8V/S
0.5 C 0.2C
As FAST
0.3C
0.1C
×
KEY FUNCTION
5/23
CYC MANU
-3.0 ～
×
10.0A
Adjust
-able
√
×
the
Advertisement
Table of Contents
