Handling Instruction For Lead Acid Batteries; Lead Acid Battery Summary; Edit Batt.m For Your Lead Acid Batteries - Flash N61e Instructions Manual

N61e V1.0 or Higher
SAFE TIME = (Charge Capacity / Operating Current * 1.5).
If a battery's actual capacity is empty, you can refer to the quick data:
FAST: 90Min STD: 180Min
SLOW: 450Min. STG: 90Min
Par10. CAP. MAX
You can define the max charging capacity to avoiding overcharging. This
percentage value relates to the set battery capacity. The range is INH, 1 ...
150% for lithium. 'INH' means N61e will ignore this stop condition.
Par11. RESET BATT
Par12. HISTORY
Par13. INPUT
Par14. BATT.
Please refer the portion: HANDLING INSTRUCTION FOR Lithium
Battery.Par.7 ...Par.10.
HANDLING INSTRUCTION FOR Lead Acid Battery

Lead Acid Battery Summary

Nominal voltage: 2V
Recommended constant current: 0.1～0.3C
Max charge voltage: 2.42V
Min discharge cut‐off voltage: 1.8V
Maximum continuous discharge current: 0.2C
Recommend Protective temperature: 55°C

Edit Batt.M for your Lead Acid Batteries

Par1. Battery Type
The characteristics of lead-acid is quite different to Ni×× and lithium
batteries. It's necessary to select the proper type for safe operation.
Par2. Number of Cells in Series
Wrong setting for this parameter will cause
permanent damage to your packs or charger
and surroundings. It allows you to select
from 3/6/9/12 cells. The unit is 'S' which
means cells in series.
Par3. Capacity
capacity is a very important parameter. This parameter will work on the
operating control. It's mostly obvious that it determines the charge current as
working at STD/SLOW function. The charge rate is fixed. But the actual
B Pb 2S 4.50Ah
▊
STD CHG
Page.1 (Par1/2/3/4)
14/23
+1.5A