Balancer; Handling Instructions For Nicd &Nimh Batteries; Nicd & Nimh Battery Summary - Flash N61e Instructions Manual
Quick charger, discharger, balancer for li-po li-ion, li fepo4(a123), ni-cd, ni-mh, lead-acid up to 10 amp charge, 3 amp discharge convenient 'function' option fast/ std / slow / stg / cyc / manu
Table of Contents
Advertisement
N61e V1.0 or Higher
icon 'b' indicates which cells are being balanced.
Figure 2
BALANCER
After powering on the N61e, no matter
whether a battery has been connected to the
output, the balancer will auto run at once as
N61e
Balance Port→
soon as it had been connected as Figure2.
The voltage of each cell can be shown on any Li-Battery memory. The unit is
mV. And b, a tiny logo, indicates the cell in balancing. The balancer only
works on the cell which has a voltage higher than 3.3V. The max balancing
current is 100mA. Voltage resolution will be less than 10mV per cell.
It's strongly recommend to charge a pack at a low current while balancing if
the voltage difference is larger than 100mV.
HANDLING INSTRUCTION FOR NiCd &NiMH Battery
NiCd & NiMH Battery Summary
Nominal voltage: 1.2V/cell
Min discharge cut off voltage:0.9V/cell.(3～6S:1.0V,12～18S:1.2V)
Recommended charge current:0.02～2C
4000 3995 3990
b
0
Page.6(Par11)
Figure 2
11/23
0
0
Advertisement
Table of Contents
