Precaution - Flash N61e Instructions Manual

Quick charger, discharger, balancer for li-po li-ion, li fepo4(a123), ni-cd, ni-mh, lead-acid up to 10 amp charge, 3 amp discharge convenient 'function' option fast/ std / slow / stg / cyc / manu
Table of Contents

Advertisement

N61e V1.0 or Higher
N61e is simple to use, but the safe operation requires some knowledge of
batteries and chargers. Mishandling batteries or chargers can be dangerous,
as it involves a risk of the batteries exploding and catching fire or charger's
permanent damage. Be sure to read these entire Instructions carefully before
you use N61e for the first time.
Don't leave the charger unattended while in use.
Don't place the charger or battery on a flammable surface or near a
flammable object while in use.
Don't attempt to charge or discharge batteries in incompatible types or
current.
Don't overcharge or over discharge batteries as permanent damage
could result.
Don't attempt to charge or discharge a battery if it is hot.
Don't attempt to balance a batteriy while the charge output is
connected to another battery.
Don't touch the rear aluminium radiator extrusion as the high power
operation can cause it to overheat.
Don't allow water, moisture or foreign objects into the charger.
Don't block the air intake holes or fan which could cause the charger
to overheat and cause permanent damage.
Don't attempt to short-circuit the output as permanent damage could
result.
Don't leave the charger connected to a power source or batteries when
not in use.
Keep out of the reach of children.
It is STRONGLY RECOMMENDED to use the temperature
detection sensor when charging.
PRECAUTIONS
3/23

Advertisement

Table of Contents
loading

Table of Contents