Table of Contents
Advertisement
N61e V1.0 or Higher
value is different as determined by the capacity you choose.
STD / SLOW & MANU (function & operating current)
Par4.
The STD function has a fixed operating current at 0.3C, and SLOW function
fixed at 0.1C. But in the MANU function, you can adjust the current from
-3A to 10 A. The actual operating current has been limited to Max power,
which is associated with input voltage.
Par5.
SAFE TIME
This safe time protects a pack from heavy
overcharge. The preset range is INH, 1 ...
990 Min. 'INH' means N61e will ignore this
stop condition. If the timer reaches SAFE
TIME, N61e will auto stop charging even if
the pack is not full. So refer the following
formula to set a suitable time.
SAFE TIME = (Charge Capacity / Operating Current * 1.5).
If a battery's actual capacity is empty, you can refer to the quick data:
STD: 66Min SLOW: 132Min
Par6.
CAP. MAX
You can define the max charging capacity to avoiding overcharging. This
percentage value relates to the set battery capacity. The range is INH, 1 ...
120% for lithium. 'INH' means N61e will ignore this stop condition.
Par7.
RESET BATT
Par8.
HISTORY
Par9.
INPUT
Par10. BATT.
Please refer the portion: HANDLING INSTRUCTION FOR Lithium
Battery.Par.7 ...Par.10.
DISPLAYS DURING CHARGE OR DISCHARGE
There are 3 pieces of page showing the
state of charge/discharge on LCD.
On Page 1, you can acquire the major
information on the packs or charger. The
contents include Battery Type, the number
of cells in series, having charged or discharged capacity, the voltage of pack,
the operating current, as well as the timer count.
SAFE TIME: 80Min
CAP. MAX: 120%
Page.2 (Par5/6)
LiPo3S +4500mAh
12.60V 2.5A 1h03
Page.1
15/23
Advertisement
Table of Contents
