AEG ME09 Installation, Operation And Maintenance Manual page 7

BREAKER
1.
1
1.1 INTRODUCTION
Quality Assurance
All ME09 circuit breakers have been designed and manufactured to
the highest technical standards.
AEG uses strict procedures ensuring that the men oned
technical standards are met whilstmaintaining a rst class
product quality.
Op ons Check Sheet
Each circuit breaker comes with an op ons check sheet that lists
all op onal features and accessories included in the circuit
breaker, casse e and trip unit (if ordered)
Catalogue number descrip on
see Appendix
Product Serial Number
When communica ng with AEG on any aspects of this device
please men on the serial number. Each circuit breaker has a
unique serial number located in two places:
• On the top face of one of the retractable li ing brackets.
• On the le side (viewed from front) of the front cover.
1.1.1 Short Product descrip on
The EntelliGuard™ G Power Circuit breaker is an Air
Circuit Breaker designed to meet the Global ANSI, UL and IEC
standards. This manual being speci cally dedicated to the
design mee ng the IEC/EN 60947 standard, for other standards
please contact us.
The device is designed for use in networks with voltages up to
1000V AC or 750V DC and to be fully selec ve with other
EntelliGuard and GE Record Plus Circuit Breakers.
It is available as 3 or 4 pole device in three envelopes and can be
used for current ra ngs from 80 up to 6400 Amps.
As a breaker the EntelliGuard™ G can be equipped with one of
four Electronic Trip Unit types each having the same universal
se ng interface and an LCD screen.
1.1-02