AEG ME09 Installation, Operation And Maintenance Manual page 12

1.1-07
INTRO BREAKER
TRIP UNIT
LOCKS ACCESSORIES
1.1.4 Front label data overview:
1. Product Denomina on
2. Bar code
3. Colour Code indica ng Interrup on Tier
4. Voltage Ra ngs
5. Current Ra ngs
6. Cer ca ons & Standards
7. Short Circuit Interrup on data
8. Manufacturing Date
1.1.5 TOOLS needed for installa on
Table 1.1 provides a list of the hand tools required to install,
operate and maintain the 5000-6400A Circuit Breaker.
Table 1.1: Required Hand Tools
Tool Name / Func on
Cluster pliers (GUNI):
To remove cluster contacts for inspec on.
Screwdriver (8 mm at):
To operate racking aperture shu er drive.
Allen key (5 mm):
To remove arc chutes for inspec on and
maintenance. To remove or adjust xed and
moving arcing contacts.
Allen key (4 mm):
To remove motor operator moun ng screws.
Metric feeler gauges:
To check arcing contact gaps.
Pozidrive screwdriver (#2):
To remove mechanical and electronic
component moun ng screws. To connect
wiring
to secondary contact terminals.
Pozidrive screwdriver (#3):
To remove front cover moun ng screws.
TESTS APPENDIX