Lower lamp Auto The circulation pump is controlled on and Immersion heater is in operation. off by the control system or clock thermo- Flashing - stat. Not lit Immersion heater is not in operation. Circulation pump in continuous operation. F205P...
Page 3
Night : In this mode you get the setting for night temperature for the entire day. Manual: (no symbol) In this mode the set tempera- tures are not used. Press to increase or decrease the temperature indoors. F205P...
E.g. You change the 05:00 setting of the clock thermostat If you want one indoor temperature during the daytime from 17 °C to 20°C. F205P starts to increase the tempera- and another indoor temperature during the night select °C...
Check that the filter is not damaged. New original fil- ters can be ordered from a Nibe distributor. Re-assembly takes place in the reverse order. The cleaning time intervals vary depending on the amount of dust in the exhaust air.