Related Manuals for Nibe UKV 20 Series
Summary of Contents for Nibe UKV 20 Series
- Page 1 User and Installer manual NIBE UKV 20 20-500, 20-750, 20-1000 Accumulator tank CHB EN 1743-1 431416...
-
Page 3: Table Of Contents
Table of Contents 1 Important information 2 For the User 3 For the Installer 4 Technical data Contact information NIBE UKV 20 Table of Contents |... -
Page 4: Important Information
This symbol indicates tips on how to facilitate using the product. Marking The CE mark is obligatory for most products sold in the EU, regardless of where they are made. Chapter 1 | Important information NIBE UKV 20... - Page 5 Current regulations require the heating installation to be inspected before it is commissioned. The inspection must be carried out by a suitably qualified person. Description Notes Signature Date ✔ Heating medium (page 13) Shut off valves Safety valve NIBE UKV 20 Chapter 1 | Important information...
-
Page 6: For The User
Service For service, contact the installer. The serial number (PF3) (14 digits) and installation date should always be stated. Only replacement parts supplied by NIBE may be used. Chapter 2 | For the User NIBE UKV 20... -
Page 7: For The Installer
0 °C. tion, and can be used during external control of the Position NIBE UKV 20 on a firm base that can take the heating system. weight, preferably on a concrete floor or foundation. - Page 8 QM25 Valve, bleeding int. ¾" Submerged tube, docking int. Ø 16 mm Submerged tube, docking int. Ø 16 mm Submerged tube, docking int. Ø 16 mm Adjustable feet Serial number plate Chapter 3 | For the Installer NIBE UKV 20...
- Page 9 Finally, fit all the supplied cover discs on the relevant connections by pressing them over the connections. NOTE Fit the cover discs before the pipe installation is made. NIBE UKV 20 Chapter 3 | For the Installer...
- Page 10 All connections (including connections or holes that are not used) must be insulated to minimise energy losses. NIBE UKV 20 can be equipped with the following ele- ments, connection dimension G50. When installing the water heater, ensure that there is enough room in front of the connection area to remove the element, see fol- lowing table.
- Page 11 When the system volume in the climate system is below 20 l/kW (heat pump output at 7/45 °C) and/or the flow is choked uncontrolled, a UKV tank is installed as a volume increaser. A UKV tank is installed to reduce heat spikes in the climate system. NIBE UKV 20 Chapter 3 | For the Installer...
- Page 12 A UKV tank is installed to reduce heat spikes in the climate system. Diagram for charging the hot water production GP11 For multiple-occupancy properties. NOTE! These are outline diagrams. Actual installations must be planned according to applicable standards. Chapter 3 | For the Installer NIBE UKV 20...
- Page 13 3. When only water comes out of the vent valve (ini- tially an air-water mixture comes out of the valve), the vent valve can be closed the accumulator tank is filled. NIBE UKV 20 Chapter 3 | For the Installer...
-
Page 14: Technical Data
4 Technical data Dimensions UKV 20-500 UKV 20-750 UKV 20-1000 Insulator end panel NIBE UKV 20 Model UKV 20-500 UKV 20-750 1020 1000 UKV 20-1000 1130 1110 Chapter 4 | Technical data NIBE UKV 20... - Page 15 Not all accessories are available on all markets. tion. (When connecting Immersion heater IU) Immersion heater IU Part no. 018 893 Immersion heater IU 31 - IU 311 See table See table (page 10) NIBE UKV 20 Chapter 4 | Technical data...
-
Page 19: Contact Information
Tel: +7 831 419 57 06 E-mail: kuzmin@evan.ru www.nibe-evan.ru NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 Markaryd Tel: +46 (0)433 73 000 E-mail: info@nibe.se www.nibe.se For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information. - Page 20 WS name: -Gemensamt WS version: a434 WS release date: 2017-10-23 10:36 Publish date: 2017-10-23 10:39 NIBE AB Sweden Hannabadsvägen 5 Box 14 SE-285 21 Markaryd info@nibe.se www.nibe.eu 431416...