Body Solid SPRJAM Accessories Assembly Owner Manual page 13

S T E P
3
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts,
they must be wrench tighten to fully go on.
3A. Attach Left (D) & Right (E) Brackets of Jammer Arms to the
Uprights (F) of the Rack.
3B. Insert Quick Release Pins (#9) to the Left (D) & Right (E) Brackets
of Jammer Arms.
Note: Please make sure the rack is securely anchored to the ground
before use.
Adjustable Jammer Arms
13