Assigning Device Types; Figure 3.13: Oscar Interface Dsview Ip Dialog Box; Figure 3.14: Oscar Interface Devices Dialog Box - Avocent DSR Series DSR1010 Installer/User Manual

32 DSR Switch Installer/User Guide
NOTE: If the DSR switch is already associated with a DSView 3 server, the following message will appear
instead of the DSView IP dialog box: Feature unavailable: This appliance is already being managed by a DSView
system.
3. Enter the DSView 3 software server IP address that you want to contact in the DSView Server
IP Address field.
4. Enter how often (in minutes) you want the DSR switch to attempt to contact the DSView 3
software server in the Retry Interval field.
5. Click OK.

Figure 3.13: OSCAR Interface DSView IP Dialog Box

Assigning device types

To access the OSCAR interface Devices dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Devices to open the Devices dialog box shown in Figure 3.14.
NOTE: The Modify button is available only if a configurable switch is selected.

Figure 3.14: OSCAR Interface Devices Dialog Box

Print Screen to open the Main dialog box.