Soft Switching; Viewing The Status Of Your Dsr Switching System; Table 3.1: Oscar Interface Status Symbols - Avocent DSR Series DSR1010 Installer/User Manual

16 DSR Switch Installer/User Guide
To select the previous target device:
Press
Print Screen
and current connections.
To disconnect from a target device:
Press
Print Screen
selected. The status flag on your desktop displays Free.

Soft switching

Soft switching is the ability to switch target devices using a hotkey sequence. You can soft switch
to a target device by pressing
number. If you have set a Screen Delay Time and you press the key sequences before that time has
elapsed, the OSCAR interface will not display.
To soft switch to a target device:
Press
Print Screen
type the port number and press
-or-
If the display order of the Main dialog is by name (the Name button is depressed), type the first few
letters of the name of the target device to establish it as unique and press
To switch back to the previous target device, press

Viewing the status of your DSR switching system

The status of target devices in your system is indicated in the far right columns of the Main dialog
box. The following table describes the status symbols.

Table 3.1: OSCAR Interface Status Symbols

Symbol
and then
Backspace
and then (zero). This leaves the user in a free state, with no target device
Alt+0
Print Screen
. If the display order of the Main dialog is by port (the Port button is depressed),
Enter
Description
(green circle) Server connected, powered up and the IQ module is online.
Connected target device is powered down or is not operating properly, and the IQ module
is offline.
Connected switch is online.
Connected switch is offline or not operating properly.
(yellow circle) The designated IQ module is being upgraded. When this symbol displays, do not
cycle power to the DSR switch or connected target devices and do not disconnect IQ modules.
Doing so may render the module permanently inoperable and require the IQ module to be
returned to the factory for repair.
. This key combination toggles you between the previous
and then typing the first few characters of its name or
.
Print Screen
.
Enter
then .
Backspace