Setting The Keyboard Country Code; Figure 3.9: Oscar Interface Screen Saver Dialog Box - Avocent DSR Series DSR1010 Installer/User Manual

28 DSR Switch Installer/User Guide

Figure 3.9: OSCAR Interface Screen Saver Dialog Box

To set the Screen Saver options:
1. Type the number of minutes for Inactivity Time (from 1-90) to delay activation of password
protection and the screen saver feature.
2. For Mode, select Energy if your monitor is E
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR
3. (Optional) Click Test to activate the screen saver test, which lasts 10 seconds, then returns you
to the Security dialog box.
4. Click OK to save your settings.
To exit Screen Saver mode and log in to the local port:
1. Press any key or move the mouse.
2. If OSCAR Authentication has been enabled, you will see a login screen. Enter your username
and password and then click OK. If you do not know your username and password, contact the
DSView 3 software server administrator.
3. The Main OSCAR interface dialog box will appear where you may select any available
target device.
To immediately activate the screen saver:
Press
Print Screen
This command sequence works only when the user is connected to a target device.

Setting the keyboard country code

NOTE: Using a keyboard code that supports a language different from that of your DSR switch firmware will
cause incorrect keyboard mapping.
®
.
, then .
Pause
S compliant; otherwise select Screen.
®
NERGY TAR