28
AutoView 3050/3100/3200 Switch Installer/User Guide
Figure 3.11: OSCAR Interface IP Setup Dialog Box
3.
Select either IPv4 or IPv6.
4.
Either select or deselect the DHCP checkbox.
NOTE: If you select the DHCP checkbox, any information that you enter in the IP Address, Prefix/Netmask and
Gateway fields will be ignored.
5.
If you deselected DHCP in step 4, type the desired information in the IP Address, Prefix/
Netmask and Gateway fields.
6.
Click OK.
Assigning device types
To access the OSCAR interface Devices dialog box:
1.
If the OSCAR interface is not open, press
2.
Click Setup - Devices to open the Devices dialog box shown in Figure 3.12.
NOTE: The Modify button is available only if a configurable switch is selected.
to open the Main dialog box.
Print Screen