Table of Contents
Advertisement
confi guration screen.
3.
Press Enter to save the new entry.
To remove a channel from the Scan List:
1.
Use the Arrow keys to highlight the channel you wish to delete.
2.
Press the F3 key.
3.
Press Enter to confi rm the deletion.
Resetting your Mouse
If your mouse locks up during normal use with the AutoView, you may be able
to re-establish operation by issuing a reset command. The reset command
sends a hot-plug sequence to the server. The hot-plug sequence to a Plug and
Play server causes the mouse settings to be sent to the AutoView. With
communication re-established, functionality is restored to you.
To reset the mouse values:
1.
Press the Control key twice to access the Administrator Channel List.
2.
Press Control twice more to access the Administrator Commands menu.
3.
Highlight either Reset PS/2 Standard Mse/Kbd or Reset PS/2 Wheel Mse/
Kbd, depending on the type of mouse you are using.
4.
Press Enter to activate the reset.
Displaying Version Information
Use the Version screen to display the system firmware. This information
facilitates system troubleshooting and support. For optimum performance,
keep your firmware current.
To display version information:
1.
Press the Control key twice to access the Administrator Channel List.
2.
Press Control twice more to access the Administrator Commands menu.
3.
Highlight Version Information and press Enter. The Version screen appears.
Keyboard Switching
One of the ways to change the active channel in a non-secured AutoView
system is by entering a short sequence of keystrokes on the keyboard. This is
called keyboard, hotkey or soft switching. In addition, there are a variety of
Chapter 3: Basic Operations
33
Advertisement
Table of Contents
