Siemens SICAM AI Product Information page 65

The conductor cross-section for the 20-mA input
terminals (T) and (Q) amounts to:
0.2 (AWG 24) to 1.5 mm² (AWG 16), direct connec-
tion of stranded wires without bootlace ferrule is not
recommended.
Wire stripping length
Material
RS485 interface (J) on the terminal side of
7XV5674-0KK30-xAA1:
RS485 cable with the plug connector D-sub socket
9-pin
820-nm optical interface (J) on the terminal side of
7XV5674-0KK40-xAA1:
FO cable fitted with ST connector
Ethernet interface (Z) on the top side:
Ethernet patch cable with RJ45 plug connector or
Y cable if an Ethernet switch is used
DANGER
Danger due to high voltages
Non-observance will lead to death or serious injury.
The grounding on the SICAM AI Unit 7XV5674
always has to be connected to the protective conduc-
tor terminal
Do not look into the laser beam, not even with optical
devices!
SICAM AI Unit 7XV5674, Product Information
E50417-B1150-C492-A1, Edition 09.2012
(terminal block H).
10 mm (0.39 inch)
Cu / E-Cu
23