ZUMEX Speed Up Citric Active Quick Start Manual page 5

Recommended cleaning instructions
Midday cleaning (recommended for machines under intensive use)
Cover, Juicing system and PulpOut system
1
Turn the knobs and take off the front cover
as well as the side outputs.
4
Assemble the blade protector.
7
Clean the front zone of the machine, fo-
llowing the steps shown and removing all
the particles which have adhered.
Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
2
Take off the automatic PulpOut System, by
lifting the assembly with the part closest to
you.
5
Pull off the peel ejectors.
Clean all the parts
with the steps
described.
3
Remove the blade by pressing on the centre
and pulling the handle towards you.
Caution! Put the protector on the cutting zone.
6
Unscrew the securing knobs of the pressing
units. Take off the pressing units in pairs.
Replacing parts.
For quick cleaning in the middle
of the day, we recommend
having a kit with spare parts.
This Kit is made up of: a cover,
juicing system and PulpOut
system.
www.zumex.com