Download Print this page

ZUMEX Speed S+ Manual

Cleaning protocol

Advertisement

Quick Links

CLEANING PROTOCOL
This cleaning protocol* guarantees an efficient, hygienic cleaning process, free from
bacteria, even when the equipment is very dirty.
By means of this process, you will also contribute to the proper preventive maintenance
of your Speed S +Plus.
Below are the steps to follow to fulfil the protocol with success.
① Utensils required for effective cleaning:
·
Zumex Citric Active
·
Disinfectant: Hydroalcoholic at a concentration of 0.91g/ml
·
Clean or new sponge (of a material that does not scratch the machine surfaces)
·
Clean disposable paper.
·
Wash point (para los puntos de limpieza que lo requieran)
NOTE: The brush must be cleaned and sanitised by following the instructions below.
② Steps required for effective cleaning:
In the juice circulation zone, follow the specific steps to guarantee maximum hygiene:
1. Apply Zumex Citric Active
2. Rinse with water.
3. Apply a hydroalcoholic disinfectant with a concentration of 0.91g/ml and leave to rest for 1 minutes.
4. Rinse with water.
5. Final drying of each of the parts and recesses.
Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
detergent
TM
to remove wax and pulp. Leave to act 30 seconds and remove the dirt with a sponge.
TM
* MERIEUX NUTRISCIENCES has taken part in the design and validation of these cleaning
instructions. Validation report of the cleaning instructions: IFSC243/19Rev1.
www.zumex.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Speed S+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZUMEX Speed S+

  • Page 1 5. Final drying of each of the parts and recesses. * MERIEUX NUTRISCIENCES has taken part in the design and validation of these cleaning instructions. Validation report of the cleaning instructions: IFSC243/19Rev1. Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999. www.zumex.com...
  • Page 2 The cleaning process will be explained in details for each one of the machine’s components below. Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999. www.zumex.com Zumex Group S.A.
  • Page 3 Pulp Out with the clea- washer. ning steps indicated. Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999. www.zumex.com Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
  • Page 4 Insert the cleaning brush into the Drain&Clean hole in the base of the feeder and remove any residue that you may find in the draina- ge tube. Zumex Group S.A. Tel. +34 961 301 251. zumex@zumex.com. Zumex Service Tel: +34 960 800 999. www.zumex.com...