Table of Contents
Advertisement
Available languages
Available languages
ZEPHYRONLINE.COM
Horizontal Ducting Preparation
Monsoon Connect Use, Care, and Installation Guide
Installation Instructions
1. Follow steps 1 to 4 from pages
15 and 16. Remove blower molex
plug.
2. Remove blower from liner by
removing the (4) 3/16" x 3/8"
screws from the top of the liner.
Set screws aside for later usage.
3. Using a flat head screwdriver,
remove 8" round knock-out plate
at the back of the liner.
17
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Monsoon Connect and is the answer not in the manual?
Questions and answers
The proximity control is not turning on! Troubleshoot the problem.
Can not get the on off to illuminate