Conference - AT&T Definity Callmaster II User And Installation Instructions Manual

CONFERENCE

To add another party to an existing call
Note: If your CALLMASTER voice terminal is connected to a DEFINITY
Generic 1 or Generic 3, the conference call can include up to six parties.
If your CALLMASTER is connected to a DEFINITY Generic 2, the
conference can include up to three parties. (For a conference call of
more than three parties, contact your system manager.)
Conference
Press
1
Ring
Present call is put on hold; all other parties remain connected to
each other
You are given a new call appearance and hear dial tone
Dial number of new party and wait for answer
2
If party answers, explain who is on the conference call and go on
to Step 3
If party does not answer or if line is busy, press fluttering
to return to held call (skip the next step)
Conference
Press
3
Ring
All parties are now connected
Repeat Steps 1 through 3 to add another party to the conference
call
To add a call you have put on hold to another call to which you are
connected
Conference
Press
1
Ring
Green light at held call appearance continues to flutter
Green light at current call appearance also flutters
You are given a new call appearance and hear dial tone
Press
2
xxxxx
Conference
Press
3
Ring
All parties are now connected
again
of held call (first call)
again
19
xxxxx