Table of Contents
Advertisement
Headset
Jacks
FIGURE 2 The headset jacks on the side of the CALLMASTER
On both sides of the CALLMASTER (II and III) voice terminals, as
shown in Figure 2 above, there is a set of headset jacks. Use these
jacks for connecting a headset to your CALLMASTER set.
Two headsets plugged into the sides of the CALLMASTER can
NOTE:
be used simultaneously.
If any adjunct is active, the left and right headset jacks on the voice
terminal are deactivated.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Definity Callmaster II and is the answer not in the manual?
Questions and answers