Pedals And Switches; Midi; S/Pdif Digital I/O; Speaker Output - Kemper PROFILER The Basics & Profiling Manual

28 KEMPER PROFILER

Pedals and switches

(7)
You can connect a variety of pedals and switches to control several functions. Pedal #2 is the volume ped-
al by default. When you connect a foot switch, use the parameters in System mode to assign that pedal to
perform a variety of functions. Pedal #1 defaults to the control of Wah-type effects.

MIDI

(8)
Use these ports to connect the PROFILER to MIDI equipment. You can send MIDI program changes to the
MIDI Input of the PROFILER to switch between rigs, and control changes to switch and control effects. If
you send MIDI Clock to the PROFILER, it will instantly sync its tempo, so tempo dependent effects like de-
lay or tremolo will adapt their timing.

S/PDIF digital I/O

(9)
This is a digital input and output that can be used to connect the PROFILER to other S/PDIF compatible
devices such as certain computers and audio interfaces.

Speaker Output

(10)
PROFILER PowerRack / PowerHead only. See Power Amp chapter for details.
Kensington Lock™ Connector (11)
Here, you can connect a Kensington Lock in order to protect your PROFILER against theft.