Return And Alternative Input; Power Connector; Usb - Kemper PROFILER The Basics & Profiling Manual

✔ ✔
Note: The output purposes described here are just the standard settings. You can change the signal sourc-
es individually for each output in the Output Menu; e.g. you can set the Main Output to only deliver the
wet Delay and Reverb signal, while the Direct Output carries the pure amp sound without effects. Refer to
the Reference Manual for more information.

Return and Alternative Input

The ALTERNATIVE INPUT can be used as a rearside guitar input, which is convenient for Rack and Power-
Rack in particular. The RETURN input is available as TRS or XLR input. The RETURN input can be used as a
loop return in external hardware equipment. Select "Loop Mono" or "Loop Distortion" in one of the stomps
to include a hardware effect in your signal flow. When combined, the RETURN and ALTERNATIVE input
can be used as the stereo loop returns for external stereophonic equipment by selecting "Loop Stereo"
in the EFFECTS section (X or MOD). Both the RETURN and the ALTERNATIVE input can also be used as
auxiliary inputs. You could, for instance, use this feature to mix in music from your MP3-player to the sound
of the Profiler to play along. You will find the corresponding mix controls in the Output Stage. Please note
that the PROFILER's XLR input does not provide phantom power. More details about the usage of the RE-
TURN, in context of profiling, can be found in our Profiling Guide.

Power connector

Connect this to your wall outlet using the supplied power cable. The internal, universal power supply ac-
cepts 100 V - 240 V AC via the usual IEC inlet.

USB

(6)
Use the USB host port to connect USB sticks for backups and OS updates. See "Updates, backup and
sharing sounds" for details.
(4)
(5)
BACK PANEL OVERVIEW 27