Chapter 6 Periodic Maintenance; Overview; Periodic Maintenance; Procedure - GE LOGIQ A1 Basic Service Manual

GE MEDICAL SYSTEMS
REV 2

CHAPTER 6 PERIODIC MAINTENANCE

6-1

Overview

It has been determined by engineering that your LOGIQ A1 system does not have any
high wear components that fail with use, therefore no Periodic Maintenance Inspections
are mandatory. Some Customers Quality Assurance Programs may require additional
tasks and or inspections at a different frequency than listed in this manual.

6-2 Periodic Maintenance

Termly maintenance including eyeballing system capability examining and termly
cleaning relevant key parts. One time maintenance every six months to insure systemic
capability steady. Maintenance period is evaluated by operating equipment 40 hours
every week.
6-3

Procedure

6-3-1 Visual inspection

1. Check if the cable is ruptured or fissured and the insulated layer of cable is abraded.
2. Check if the cable jacket and cable airproof packet / link implement clamp well.
3. Check if cables connect correctly.
4. Check if all the bolts are there.
5. Check if all cable plugs are connected to the corresponding sockets.
6. Check if all parts are fixed to appropriate location and without damnification.
7. Check if the keys and trackball on the keyboard work well and without mechanical
damnification.
8. Check if the probe and probe cable is dilapidated or aging.
9. Check if the probe is dilapidated.
LOGIQ A1 BASIC SERVICE MANUAL
33
5176463-100