Table of Contents
Advertisement
Get/Set Toolbar
The Get/Set Toolbar provides buttons for getting and setting configuration
parameters for selected ports.When a port is selected, its configuration is
reflected on the Get/Set Toolbar. Each group of buttons represents the
various possible states of a configuration parameter. For example: The first
group of buttons represents the possible speed of a port - 10 Mbps, 100
Mbps, or 1000 Mbps. If the center button is depressed, the port is
currently configured to operate at 100 Mbps.
Selected ports can be configured using the Get/Set Toolbar. To change the
configuration of a port, click the button representing the value of the
parameter you want to apply to the port. Click
with the changes. Click
applicable to the selected port are dimmed.
Multiple ports can be simultaneously configured using the
Get/Set Toolbar. When multiple ports whose configurations are not
identical are selected, only the parameters whose settings are identical on
the selected ports are reflected in the Get/Set Toolbar. For example, if a
port operating at full duplex and a port operating at half duplex are
selected, neither of the duplex mode buttons on the Get/Set Toolbar are
depressed.
The table below displays the buttons on the Get/Set Toolbar and explains
their functions and settings.
Cajun P120 Manager User Guide
Button
Description
Get and set the port's speed: 10 Mbps, 100 Mbps, 1000
Mbps.
Get and set the port's status: Enabled, Disabled.
Get and set the port's mode: Half duplex, Full duplex.
Get and set the port's Flow Control mode:
FlowControl on, FlowControl off.
Get and set the port's auto-negotiation status:
Auto-negotiation Enabled, Auto-negotiation Disabled.
Get and set the port's priority: Regular priority, High
priority.
Apply or cancel the configuration changes made with the
Get/Set Toolbar.
cancel
to discard the changes. Options not
Table 1-4. Get/Set Toolbar
Introduction
apply
to update the device
10
Advertisement
Table of Contents
