McCrometer DURA MAG McMag 3000 Quick Connect And Strain Ag Relief Retrofit Instructions

ag
3000
TM
Supplies Needed for Quick Connect Retrofit:
1. Tamper Proof Seal
2. Tamper Proof Stickers
3. Zip tie
4. Dry pack
5. Quick connect receptacle
6. Quick connect receptacle
7. Replacement screw
1
2
6
5
Supplies Needed for Hard Wire Retrofit:
1. Tamper Proof Seal
2. Tamper Proof Stickers
3. Strain Reliefs
4. Lengths of open ended, non-prepared cables
5. Replacement screw
6. Zip tie
7. Dry pack
1
2
3
4
www.mccrometer.com
Quick Connect and Strain
Relief Retrofit Instructions
3
4
7
5
6
7
3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA
TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078
Copyright © 2016 McCrometer, Inc. All printed material should not be changed or altered without permission of McCrometer.
Any published technical data and instructions are subject to change without notice. Contact your McCrometer representative for
current technical data and instructions. U.S. Patent 8,997,580 B2; foreign patents pending.
Converter with plugs and tamper seal
I. Cover and Steel Plug Removal
1. Remove the warranty stickers.
2. Cut away the tamper proof seal.
3. Remove screws holding the lid to the housing.
D M
URA AG
Printed In The U.S.A.
Lit. # 30124-55 Rev. 1.1 / 06DEC2019
™
Page
1