Table of Contents
Advertisement
REPLACING THE FUSES
•
Loosen the securing screws.
•
Remove the back (A).
•
Find which fuses have blown on the control unit (B).
•
Change them with new ones that have the same characteristics.
•
Put the back panel (A) back and fix it with the screws.
PROBLEM
The machine does not start.
The machine stops while it is being
used.
PROBLEM
There is no electricity.
The pedal control is connected to
the machine.
Fuses blown.
11
Maintenance
Troubleshooting
REMEDY
Check the general meter, the
outlet, the plug and the power
cable.
Press the pedal controls.
Replace the fuses following the
instructions in Replacing the Fuses
section under Maintenance.
Advertisement
Table of Contents
Need help?
Do you have a question about the BE-IT-0406 and is the answer not in the manual?
Questions and answers