Set Supervisor Password/Set User Password
The two features allow users to set the supervisor/user password. To set
supervisor password is a must. To set user password is not allowed if
supervisor password is clean. It is common to set both passwords.
Once it is set, the option will become Set automatically. Its default value is
Clear. The options are: Clear, Set
Onboard device Configuration
Audio Codec
Allows you to disable the onboard audio codec function.
The options are: Auto, Disabled.
USB Controller
Disable this option if you are not using the onboard USB feature.
The options are: Disabled, Enabled.
Onboard LAN Device
Allows you to enable or disable the optional LAN function.
The options are: Enabled, Disabled.
Onboard 1394 Device (optional)
Allows you to enable or disable the optional 1394 function.
The options are: Enabled, Disabled.
BIOS Setup
3 - 5