Xylem Lowara Scuba Dry Series Additional Installation, Operation And Maintenance Instructions page 21

en – Original Instructions
Figure 3: Submerged unit, installation example
1. Check valve
2. Maximum level
3. Nylon tie
4. Nylon tie
5. Float suction filter (optional)
6. Unit
7. Electric power supply cord
8. Lifting rope
9. Float switch (optional)
NOTICE:
In the operating position, the unit, the piping system, the electric power supply cord and the
lifting rope must never be in contact with the walls of the tank/basin.
SCUBA DRY – Additional Installation, Operation and Maintenance Instructions 21