Advertisement
Arm / Unlock,Disarm button a second time within 3 seconds.
Headlight Illumination.
The vehicle's headlights turn on for approximately 30 seconds, illuminating the path
to the vehicle.
SILENT DISARMING
1. As you approach the vehicle, press and hold the Lock, Arm / Unlock,Disarm button on the
keychain transmitter for 2 seconds.
Doors Unlock.
Using the optional ACCESS GUARD feature, the alarm can be wired to unlock only
the driver's door during this step. To unlock all doors, press and release the Lock,
Arm / Unlcok, Disarm button a second time within 3 seconds.
Headlight Illumination.
The vehicle's headlights turn on for approximately 30 seconds, illuminating the path
to the vehicle.
VALET SWITCH
The valet switch allows you to temporarily by-pass all alarm functions, eliminating the need to
hand your transmitter to parking attendants or garage mechanics. When the system is in valet
mode, all alarm functions are by-passed; however, the remote panic feature and remote door
locks will remain operational. To use the valet mode, the system must first be disarmed either
by using your keychain transmitter, or by activating your personalized manual override code.
1. Enter the vehicle, and turn the ignition key to the on position.
2. Move the valet toggle switch to the on position.
3. To return to normal operation, move the valet switch back to the off position any
time the ignition is on.
NOTE : Always remember to move the valet switch back to the off position. This will ensure that
the vehicle remains protected at all times.
USING THE VALET SWITCH MANUAL OVERRIDE
Your Security System can be disarmed without the use of the keychain transmitter. This is
necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its
battery fails. If your system has been selected for Valet Switch manual override as indicated on
the last page of this manual, to by-pass the alarm system;
1. Open the vehicle door. The alarm will sound.
2. Start with the Valet Switch in the off position.
3. Turn the ignition key to the on position.
4. Within 5 seconds, turn the valet switch to the on position.
The alarm system will stop sounding and enter the valet, (by-passed) mode. This is indicated
by the dash mounted LED turning on. You can now start and operate the vehicle normally. To
return to normal operation, move the valet switch back to the off position any time the ignition is
on.
OPTIONAL:
This programmable manual override is an optional feature that can be activated by your car
dealer.
PROGRAMMING THE CUSTOM CODE MANUAL OVERRIDE
Your Security System can be disarmed without the use of the keychain transmitter. This is
necessary, since you will need the ability to disarm the system if you lose your transmitter, or if
the transmitter battery fails.
Page 4
Advertisement
