1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Car Alarm
  5. Pursuit PRO-9744
  6. Owner's manual

Audiovox Pursuit PRO-9744 Owner's Manual

Remote alarm with selectable pre-load features
Hide thumbs Also See for Pursuit PRO-9744:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Remote Alarm with
Selectable Pre-Load Features
Important! The PRO-9744 alarm system is configurated for many different user
preferences. Please read this entire manual to fully understand the operation of
your specific unit's installation.
FEATURES & OPTIONS:
2 Four Button Anti Code Grabbing Programmable Transmitters
6 Channel Code Learning Receiver
Remote Panic All Modes
Protected Valet/Manual Override
8 Function LED- Armed, Disarmed, Arming, Zone 1, Zone 2, Zone 3,
Zone 4, & Valet
Intrusion Alert With Memory
Audible Arm, Disarm, Defective Zone, and Tamper Indication
Instant Siren Activation
Starter Disable
True Last Door Arming
Defective Zone By-Pass
Hard Wire Switch Sensing
On Command RF Chirp Delete
6 Tone Multi-Tone Siren
Multiple Vehicle Operation
On Command R.F. Chirp Delete
R.F. Shock Sensor Delete
SELECTABLE FEATURES:
Active or Passive Arming
Active or Passive Door Locks
Ignition Control Door Lock On/Off
Ignition Control Door Unlock, (Drivers Door or All Doors), On or Off
Independent RF Headlamp Control
20 Second Headlight Illumination Arm Or Disarm, Both Or None
Panic On Lock Button Or On Separate Button
MODEL PRO-9744
Owner's Manual
(optional Dual-Stage Shock Sensor required)
-1-

Advertisement

Table of Contents
loading

Related Manuals for Audiovox Pursuit PRO-9744

Summary of Contents for Audiovox Pursuit PRO-9744

  • Page 1 Remote Alarm with Selectable Pre-Load Features Important! The PRO-9744 alarm system is configurated for many different user preferences. Please read this entire manual to fully understand the operation of your specific unit's installation. FEATURES & OPTIONS: 2 Four Button Anti Code Grabbing Programmable Transmitters 6 Channel Code Learning Receiver Remote Panic All Modes Protected Valet/Manual Override...
  • Page 2 TRANSMITTER ICONS (Symbols): The PRO-9744's 4 button transmitter has a replaceable membrane (button pad) that uses icons to denote operation of your security system. The icons used are a standard in use by the automotive industry. Their functions are described below. LOCK: The closed lock symbol is the Lock and Arm button of your transmitter.
  • Page 3 GARAGE: The (optional) Audiovox garage door interface will control any existing electric garage door from the maximum operating range of your hand held transmitter. With the interface connected to your existing electric garage door, program this transmitter button follow- ing the program instructions supplied with your AS-9254 kit. When within range of your garage, press and release this button one time to open or close your garage door.

  • Page 4: Arming The System, Active

    50 times away from the alarm system, it is possible for the unit to go out of syn- chronization. If this occurs, simply pressing the transmitter button 2 times within 1 second will realign your transmitter to the alarm. Once realigned, normal opera- tion is resumed.

  • Page 5: Protection While The System Is Armed

    PROTECTION WHILE THE SYSTEM IS ARMED: Opening any of the protected entry points while the system is armed will immedi- ately cause the alarm system to trigger. The siren will sound, and the lights will flash. If the optional interior illumination circuit has been added, the interior light will also flash during the triggered mode.

  • Page 6: Intrusion Warning Signals

    will begin to flash rapidly indicating that the system is re-arming. Opening any door will suspend the automatic arming cycle. If the parking lights flashed three times, and the siren chirped four times, this indicates that the alarm system had been triggered in your absence.

  • Page 7: Eliminating The Normal Arm/Disarm Chirps

    system is in the armed mode, it will be necessary to override the system to operate the vehicle. In this situation, to override and disarm the system: Start with the valet/override switch in the off position. Open the vehicle door with the door key.

  • Page 8: Option Button

    or when parking along routes of heavy construction. If your system was installed with this optional Dual Stage Shock Sensor, to disable the pre-detect stage for one arming cycle any- time after the system is armed, simultaneously press the two trans- mitter buttons shown.

Table of Contents