Download Print this page

Audiovox PRO 9549FT3 Installation Manual

Pursuit series
Hide thumbs Also See for PRO 9549FT3:

Advertisement

Quick Links

Note: The method of manual override can either be selected to operate from the valet switch or operate
as custom code. Be certain to place a check mark indicating the method used in the box located on
the last page of the owner's manual.
Note: When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver's door
pin switch in order to begin the passive arming sequence.
RF Programmable Features :
Feature Selection
1st DoorL/UL
2nd Accy Lock
3rd Accy. UL
4th Headlights
5th Passive Locks
6th Passive/Active Arm
7th Voltage Sense
8th Siren/Horn
9th Horn Chirp
10th Override Method
11th Chirp Delete From Tx
To program these selectable features;
Action
Turn ignition on
Press and release the valet switch 3 times 1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off
First
Then On
Press transmitter Lock button to change
Press transmitter Lock button to change
Second
Press and release the valet switch
Press transmitter Lock button to change
Third
Press and release the valet switch
Press transmitter Lock button to change
Press transmitter Lock button to change
Fourth
Press and release the valet switch
Press transmitter Lock button to change
Press transmitter Lock button to change
Press transmitter Lock button to change
Fifth
Press and release the valet switch
Press transmitter Lock button to change
Sixth
Press and release the valet switch
Press transmitter Lock button to change
SELECTABLE FEATURES
1 Chirp
2 Chirps
1 Sec.
3.5 Sec.
Auto Lock On
Auto Lock Off
Auto UL Dr
Auto UL All
On Arm
On Disarm
Passive
Active
Passive Arm
Active Arm
Voltage Sense
Hardwire
Siren/Horn
Siren Only
10mS
16mS
Custom Code
Valet
On
Off
or
or
or
or
or
or
Model PRO 9549FT3
Installation Manual
3 Chirps
1 Sec L, Dbl. U/L
Auto UL Off
On Both
Horn Only
30mS
System Response
No response
Short chirp, then long chirp
1 chirp = 1 second door locks
2 chirps = 3.5 second door locks
3 chirps = 1 sec. lock, dbl 1 sec. unlock
2 chirps = auto locks off
1 chirp = auto locks on
3 chirps = auto unlock off
1 chirp = auto unlock drivers door only
2 chirps = auto unlock all doors
3 chirps = headlight output when arming and disarming
4 chirps = headlight output off
1 chirp = headlight output when arming
2 chirps = headlight output when disarming
2 chirps = active locks
1 chirp = passive locks
2 chirps = active arming
1 chirp = passive arming
4 Chirps
Default
1 Sec.
Auto Lock Off
Auto UL Off
Off
Both
Active
Active Arm
Hardwire
Siren/Horn
16mS
Valet
Off

Advertisement

loading

Summary of Contents for Audiovox PRO 9549FT3

  • Page 1 Fifth Press and release the valet switch Press transmitter Lock button to change Sixth Press and release the valet switch Press transmitter Lock button to change Model PRO 9549FT3 Installation Manual SELECTABLE FEATURES 2 Chirps 3 Chirps 3.5 Sec. 1 Sec L, Dbl. U/L...
  • Page 2 Seventh Press and release the valet switch Press transmitter Lock button to change Eighth Press and release the valet switch Press transmitter Lock button to change Press transmitter lock button to change Ninth Press and release the valet switch Press transmitter Lock button to change Press transmitter Lock button to change Tenth Press and release the valet switch...
  • Page 3: Wiring The System

    Valet Switch: Select a mounting location for the switch that is easily accessible to the driver of the vehicle. The switch does not have to be concealed, however, concealing the switch is always recommended, as this provides an even higher level of security to the vehicle. The valet switch can be mounted to the lower side of the dash by drilling a ¼...
  • Page 4 Note: This is a normally closed starter cut arrangement, and when power is removed from the security system, the starter disable feature will not operate, allowing the vehicle to start. Audiovox does not recommend using the Orange wire to interrupt anything but the starting circuit of the vehicle.
  • Page 5 Note: This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle.
  • Page 6 Normal Door Lock Operation 6 Pin Door Lock Output Connector: The orange, blue w/ white tracer, yellow, white, green, and blue wires in the 6 conductor connector are the contacts of the on board door lock relays. The function of each of these wires is listed below; Lock Relay Blue w/ White Trace = N.O.
  • Page 7: Completing The Installation

    These applications require the use of additional components which may include relays, fixed resistors, or for convenience, the AS 9159 Door Lock Interface. Refer to the AUDIOVOX Door Lock Wiring Supplement and or the Audiovox fax back service for information on your particular vehicle for properly connecting to these types of circuits.
  • Page 8 © 2000 Audiovox Electronics Corp., Hauppauge, N.Y. 11788 128-5763...