Advertisement
Ultraprobe 10,000SD
-
Steam Inspection:
NOTE:
UE DMS Software available for download at
INITIAL SETUP
To
Power On
the Ultraprobe 10,000SD, Pull and
Hold the
Instrument
Trigger. Keep Trigger
Pulled for Instrument to Remain ON. The Unit
Will Power On in the
Main
10,000SD
How To Guide
www.uesystems.com
Display.
SAFETY: WRIST STRAP WORN ALL TIMES
VALVE INSPECTION
The Ultraprobe 10,000SD
Default Mode of
40KHz
Maximum
(70). (Unless Previously Changed)
Powers On
in
with the
Sensitivity
at
Advertisement
