TMC Aquarium AQUARAY GroBeam 1500 Ultima CP ColourPlus UK Manual page 4

QU BE M/GROBE M LIGHTING STRIP P RTS LIST/DIMENSIONS
1. Power supply unit (PSU) - with single or twin DC barrel or USB outlets.
Please note: This is NOT a USB charger. NEVER plug any equipment other
than your Aquaray lights into these power supply units. Doing so will
invalidate your warranty and could damage the equipment.
2. Mains power supply cord with UK, European or USA plug configuration.
3. AquaBeam/GroBeam lamp unit - double or single lamp units with 3m (10ft)
cable complete with matching plug connector to the DC outlet from the PSU.
Please note: do not plug your AquaRay light unit into any other sockets
than that of an authentic AquaRay PSU or controller. Doing so will invalidate
your warranty and could damage your light.
4. Fixing brackets - two supplied.
5. Fixing kit.
24mm
QU BE M/GROBE M LIGHTING TILE P RTS LIST/DIMENSIONS
1
2
1. Power supply unit (PSU) - with single or twin DC barrel or USB outlets.
Please note: This is NOT a USB charger. NEVER plug any equipment other
than your aquaray lights into these power supply units. Doing so will
invalidate your warranty and could damage the equipment.
2. Mains power supply cord with UK, European or USA plug configuration.
3. AquaBeam/GroBeam lamp unit - with 3m (10ft) cable complete with
matching plug connectors to the DC outlets from the PSU.
Please note: do not plug your AquaRay light unit into any other sockets
than that of an authentic AquaRay PSU or controller. Doing so will invalidate
your warranty and could damage your light.
4. Fixing bracket – two supplied per lamp unit.
5. Fixing kit
SSEMBLY
AquaRay lamp units are fully assembled and ready to use.
Please note: To activate your 5 year guarantee on this light unit make sure you
register your products at www.tropicalmarinecentre.co.uk. See inside front
cover for more details.
INST LL TION
Please note: These lamp units are NOT designed to be operated partially or
fully submerged. They must be SECURELY mounted not less than 25mm
from the maximum water level of the aquarium.
The versatile, compact and light-weight design allows the AquaRay lamp units
to be installed above your aquarium in a variety of ways to suit any application.
The design of the lamp units means they are able to be fitted in close proximity
to the surface of the aquarium. However, mounting further from the surface of
the aquarium will maximise the spread of light from the AquaRay's beam
1. QU BE M/GROBE M LIGHTING STRIP
. Using quaBeam/GroBeam fixing brackets for more permanent
attachment with six screws (stainless steel self tap, or nylon nut and
bolt – all supplied) to the INSIDE or UNDERSIDE of a wooden or
metal hood or other enclosure.
Caution: To securely attach the
bracket to the wooden or metal
hood or other enclosure, all six
screws must be used.
We recommend adding a ventilation
fan to the hood to maximise efficiency.
4
5
4
4
3
3
468mm
Depth = 54mm
40 mm
4
MAX.
3 x AquaBeam/GroBeam
2
1
2
198 mm
Depth = 198 mm
Caution: Before
the brackets have
been attached to
the wooden or
metal hood or
other enclosure
using all six screws,
make sure that they
are fully pushed
onto the metal rail
of the heat sink.
5