Table of Contents
Advertisement
ULTRAFLEX
WARRANTY
ULTRAFLEX guarantees that its products are well designed and free from manufacturing and material defects,
for a period of two years from the date of manufacturing.
For the products which are installed and used on working or commercial boats the warranty is limited to
one year from the date of manufacturing.
If during this period the product proves to be defective due to improper materials and/or manufacture, the
manufacturer will repair or replace the defective parts free of charge.
Direct or indirect damage is not covered by this warranty. In particular the company is not responsible and this
warranty will not cover the damage resulting from incorrect installation or use of the product (except for
replacement or repair of defective parts according to the conditions and terms above).
This warranty does not cover the products installed on race boats or boats used in competitions.
The descriptions and illustrations contained in this manual should be used as general reference only.
For any further information please contact our Technical Assistance Service.
ULTRAFLEX steering system components are marked
We remind you that only
you that the ULTRAFLEX warranty is null if some ULTRAFLEX components are installed on a steering system
together with products of other brands.
1 INSTALLATION
1.1 Necessary tools
Phillips
screwdriver
1.2 Connector installation
1
Unscrew the nut (5) and
the cable terminal (6). Insert
the connector (1) on the
sheath terminal (2) and align
the slots (3) with the groove
of the terminal.
2
3
Insert the nut (5), screw the cable
terminal (6) and lock the nut (5).
page 4
of 23 -
KIT K59
marked steering systems must be used on the boats marked
Pliers
1
according to the Directive 2013/53/EU.
Open end
wrench
8mm [0,31"]
2
Insert the split pin (4) in the central holes (3)
of the connector and fold its end.
3
4
5
Installation instructions
. We inform
Socket wrench
17mm [0,66"]
6
Advertisement
Chapters
Table of Contents
