NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is
recommended that you note the BIOS setup program's settings before removing the coin-cell battery.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
back
cover.
2. Remove the
system-board
Procedure
1. Pull the coin-cell rubber cap from the system board.
2. Using a plastic scribe, press on the metal clip. Then carefully pry and lift off the coin-cell battery from the coin-cell holder on
the system board.
42
Removing the coin-cell battery
Removing the coin-cell battery
computer. After working inside your computer, follow the instructions in
shield.
28
After working
www.dell.com/