Chapter 6: Removing The Stand; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
Remove the back cover.
Procedure
NOTE: The removal and replacement process is the same for articulating and pedestal stands.
1. Remove the six screws (M4x6) that secure the stand to the middle frame.
2. Forcefully lift the stand off the I/O bracket. A snapping sound should be heard when the stand is removed correctly.
NOTE: Exercise caution when removing the stand so as to not damage the chassis fan.
16 Removing the stand
computer. After working inside your computer, follow the instructions in
Removing the stand
6
After working
www.dell.com/