12. Using the pull tab, disconnect the hard-drive data cable (SATA0) from the system board.
13. Open the latch and disconnect the power cable (MB-DCPWR) from the system board.
14. Open the latch and disconnect the power-button board cable (0SDC1) from the system board.
15. Using the pull tab, disconnect the display cable (MB-DISPC) from the system board.
16. Disconnect the fan-power cable (FAN_SYS) from the system board.
17. Release and lift the microphones cable from the routing guide on the system board.
18. Remove the five screws (M3x5) that secure the system board to the middle frame.
19. Lift the system board off the middle frame.
66
Removing the system board