Table of Contents
Advertisement
E. Air Fingers and Blank Plates
See Figure 8.
E1. Air Fingers
An Air Finger Assembly is made up of three parts:
1. Outer Plate - The Outer Plate is the removable
covering with tapered holes, which direct the air
stream onto the product being baked.
2. Inner Plate - The perforated Inner Plate is vital in
forming the unique air jets. It must be assembled
into the manifold with its holes aligned with the
holes of the outer plate.
3. Manifold - The Manifold is the assembly which
slides on tracks into the oven plenum.
Blank Plates (two sizes) and an Air Finger
9
E2. Blank Plates
1. Blank Plates - The Blank Plates are available to
install on the plenum where an air finger is not
required.
Advertisement
Table of Contents
