Page 3
III. MAINTENANCE - EVERY 3 MONTHS ... 18 IV. MAINTENANCE - EVERY 6 MONTHS ... 19 V. KEY SPARE PARTS KIT ... 20 SECTION 5 ELECTRICAL WIRING DIAGRAMS ... 21 I. WIRING DIAGRAM, 670 GAS OVEN, 208/240V, 50/60 Hz, 1 Ph ... 39 Page...
Page 13
LOCATION AND DESCRIPTION OF CONTROLS A. Main On/Off Button Turns all oven functions on or off. If the oven is below the set point, it will rise to the set point and turn the conveyor on. If it is turned off and the oven is above 200° F, the blowers will remain on until the oven drops below 200°...
Page 14
Reset” button. The controller will display the “OFF” screen, as shown in Figure 3-2. Figure 3-1 Screen Saver Figure 3-2 Main Screen OFF 2. Push the “ON/OFF” button to start the oven. The controller will display the screen, as shown in Figure 3-3. ON/OFF button Figure 3-3 Main Screen ON 3.
Page 15
2. Press the “ON/OFF” button to turn the oven off. 3. Open the window to allow the oven to cool faster. 4. After the oven has cooled and the blowers have turned off, the circuit breaker/fused disconnect may be turned off.
Page 16
• Make sure main gas is on. • Turn oven off, and restart. If it still does not light, call for service. • Turn oven off, and allow to cool. Reassemble fingers correctly.
Need help?
Do you have a question about the PS670 and is the answer not in the manual?
Questions and answers