TMC Aquarium V2 Auto Top Up Compact Manual page 8

3. Attach the float switch to the side of your aquarium or sump using the magnet mount.
Please note: The magnets are extremely strong and the force with which they attract
each other could cause serious injury if not handled correctly. Therefore please read and
take note of the following guidelines:-
CAUTION: Never place your fingers or any other body part between the two halves of
the magnet.
CAUTION: Always slide magnets together and apart (see photo 7) - do not allow
magnets to slam together as this could damage the magnets, the aquarium glass, and/or
cause the magnets to chip or shatter with a possible risk of injury to the user.
4. Install the top up pump in your desired location e.g. sump or freshwater container,
ensuring that it is fully submerged and secured.
5. Attach the flexible top up hosing securing clamp to the side of your aquarium or sump and
secure by tightening the thumb screw.
6. Carefully cut the flexible top up hosing to the correct length so that it can be successfully
threaded through the top of the flexible top up hosing securing clamp without any kinks or
sagging (see photo 8).
7. Ensure that all connections have been made correctly and securely.
Please Note: failure to do so could result in operating problems and water overflowing
from your sump or aquarium.
8. Plug in the PSU. Please Note: We strongly recommend that you regularly check the
water parameters of your aquarium to ensure optimum water quality.
6
7
8