General Installation - TMC Aquarium V2 Auto Top Up Compact Manual

GENERAL INSTALLATION

The V Auto Top Up Compact System is designed for simple installation internally in the
2
aquarium or sump.
1. Ensure there is adequate space in the aquarium or sump to allow the float switch and
mounting bracket to be correctly installed.
Please Note: The float switch must always be installed in a vertical, upright position with
the power connection cable at the top (see photo 5). Failure to do so will result in
operating problems and water overflowing from your sump or aquarium.
2. Install the float switch at the desired water depth in your preferred location in your
aquarium or sump, ensuring that it is in a position where it will not be subject to excessive
air bubbles or vigorous water movement.
Please Note: If you are using the V
incorporates two float switches, both must be positioned in the aquarium or sump to
ensure that the correct trigger signal will be sent when required (see photo 6).
Auto Top Up Compact lus System, which
2
5 6
5