Settings - Cambridge Audio CXN v2 Manual

12
has been certified by the developer to meet Apple performance standards.

Settings

Last updated: June 1, 2021 08:19. Revision #1663
cxn v2 network player / settings
Device Name
This is how your player will appear in your StreamMagic app and on your home network when using services like Spotify, Chromecast built-in and
TIDAL Connect.
Giving your player a unique name makes it easier to distinguish when using streaming and smart home services.
AirPlay Name
This is how your player will appear when using AirPlay or the Apple Home app.
Standby Mode
This selects what type of standby mode your player will use.
Network Standby means your player will still be controllable by the StreamMagic app and other network services.
If Eco mode is chosen your player will use even less power in standby but will need to be switched on either by the front panel or the remote
control.
Automatic Power Down
This sets how long your player will wait while inactive before switching in to standby.
Display Brightness
This sets the brightness of your player's display. If set to 'Off' the display will show for a few seconds after any change and then switch off.
USB Audio Class
This sets the USB Audio Class for the USB Audio input.
USB Audio Class 1.0 (default) works with USB 1.1 ports and supports up to 24-bit/96kHz.
USB Audio Class 2.0 requires a USB 2.0 port and can support up to 32-bit/384kHz (asynchronous) and up to DSD-256. Depending on your PC or
laptop you may require an additional driver.
For more info about USB Audio see our online guide.
Roon Ready DSD
Roon Ready DSD mode for the digital outputs.
Control Bus
If your device is connected to a Cambridge Audio amplifier using a control bus connector, volume commands can be sent directly to the amplifier.
Pre-amp
With Pre-Amp mode enabled the volume of the device's analogue output can be controlled using the app, the remote or the rotary dial.