Cambridge Audio CXN v2 Manual page 7

7
Connect a network cable (Category 5/5E straight-through Ethernet cable) between the CXN v2 and your router.
Connecting to a wireless network
It will need to be in the range of your wireless router.
Important note: Do not plug/unplug the wireless dongle when the unit is on.
On an iOS device go to Wi-Fi settings and select 'CXN v2'. Alternatively, connect the CXN v2 directly to the Wi-Fi network: Select your Wi-Fi network
and then enter your password.
Note: Wi-Fi network passwords are case sensitive.
For further information on CXN v2 network settings please see the "Settings >> Network" section later in this manual.
Character entry
This is typically for:
• Wi-Fi network password.
• Searching for radio stations and content on UPnP servers.
• Customising the CXN v2's "friendly" name and digital input names.