Technical Specifications - Cambridge Audio CXN v2 Manual

13
For more information see our FAQ.
Volume Limit
This sets the maximum volume that other streaming services like AirPlay, Spotify, TIDAL Connect and Chromecast built-in can set. The front panel,
remote control and StreamMagic app volume controls can override this setting.
Early Update
Setting this to 'On' will let you try out the latest firmware ahead of general release.
For more information and to find out what's new visit our FAQ.
Firmware
This will check for and apply any new firmware available for your player.
You can also check for new updates on the info screen.
When left in network standby overnight your player will check and apply any new updates.
Factory Reset
This will return your player to its factory settings.
You can also do this from the info screen.
Note: Your network player must be connected to the internet to carry out firmware updates. It is recommended that you keep your network player
connected to ensure optimal performance.
Technical specifications
Last updated: June 7, 2021 04:10. Revision #1677
cxn v2 network player / technical specifications
D/A CONVERTERS
Dual Wolfson WM8740 24-bit DACs
ANALOGUE FILTER
2-Pole Dual Differential Bessel Double Virtual, Earth Balanced
THD @ 1kHz 0dBFs
<0.001% 24-bit (at volume set to full)
THD @ 1kHz -10dBFs
<0.001% (at volume set to full)
THD @ 20kHz 0dBFs
<0.002% (at volume set to full)
FREQUENCY RESPONSE
20Hz-20kHz +/- 0.1dB *
SIGNAL TO NOISE RATIO
-112dBr (at volume set to full)
TOTAL CORRELATED JITTER
< 130pS