Advertisement
The CXN v2 is largely a software based product and new features and updates will be made available from time to time. See the Upgrade Firmware section at the end of this manual for how to check for and then automatically update your unit via the internet. The process takes only a few minutes.
We would encourage you to check for any updates before using your CXN v2 for the first time and then from time to time afterwards.
Also please do check the support page for the CXN v2 at https://techsupport.cambridgeaudio.com for details of any new features, advice on compatibility with other products and audio formats and the most recent copy of this manual.
Make sure you register your purchase.
Visit: www.cambridgeaudio.com/register
By registering, you'll be the first to know about:
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks are the property of their respective owners.
© Copyright Cambridge Audio Ltd 2020.
Cambridge Audio and the Cambridge Audio logo are trademarks of Cambridge Audio.
Stream Magic is a trademark of Audio Partnership Plc and is registered in the European Community and other countries.
This product contains software licensed under version 2 of the GNU Public License and version 2.1 of the GNU Lesser Public License. The source code for this software is available from:
http://gpl.stream-magic.com/
This product includes technology owned by Microsoft Corporation and under a licence from Microsoft Licensing GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable.
The Spotify software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.
FAQS AND SUPPORT
Please visit https://techsupport.cambridgeaudio.com
GET IN CONTACT WITH OUR DEDICATED TECHNICAL SUPPORT TEAM:
support@cambridgeaudio.com
UK: +44 20 7551 5422
US: +1 877 357-8204
HK: +852 2499 6018
For ultimate control of your Cambridge Audio CXN (v2) the StreamMagic app gives you fast access to device settings, media libraries and internet radio.
Switch the power off before making any connections.
CXN v2/CXA
To use the UPnP media sharing feature, you will need either a wired Ethernet or Wi-Fi connection to your network.
To use internet radio, Streaming Services or to receive product software updates you will also need a broadband internet connection.
Use a wired connection for seamless playback of high resolution 24-bit/176kHz and 24-bit/192kHz files.
Broadband Router/Modem
Connect a network cable (Category 5/5E straight through Ethernet cable) between the CXN v2 and your router.
Your CXN v2 will need to be in range of your wireless router.
Important note: Do not plug/unplug the wireless dongle when the unit is on.
On an iOS device go to Wi-Fi settings and select 'CXN v2'.
Alternatively, connect the CXN v2 directly to the Wi-Fi network: Select your Wi-Fi network and then enter your password.
Note: Wi-Fi network passwords are sometimes case sensitive.
For further information on CXN v2 network settings please see the "Settings >> Network" section later in this manual.
This is typically for:
To enter text:
The Music Library menu item lists all found UPnP servers and USB media devices.
There are many suitable UPnP server software packages available for PC and Mac. Stand-alone servers and Network Attached Storage (NAS) devices with built in UPnP server capabilities are also available. Please see the setup guides on our website at: www.cambridgeaudio.com/networksetup
Note: When using a UPnP server to share your media, the menu structure, search and selection criteria are determined by that server, not the CXN v2.
The CXN v2 does not scan entire USB storage devices to build an artist/ track database. It is therefore recommended that audio files are stored in a structured way by artist and album to facilitate locating tracks.
Selecting an individual track will show the following menu:
To view the queue at any time press the '•••' (more) button.
You can jump playback to any point in the queue by navigating up/down the list and pressing Enter.
Tracks can be removed from the queue by highlighting them with the navigator and pressing the Stop button.
To clear an entire queue, navigate to the bottom of the queue to highlight [Clear Queue] and press Enter.
Note: Switching the CXN v2 into Eco mdoe standby will delete the queue.
Pressing the 'i' button will cycle through:
Album art and radio station logos may also be displayed if available. For USB Media the album art needs to be in the same folder as the track.
Album art images are supported in.png and.jpg file formats only.
Images can have any name, but images named Folder.png or Folder.jpg take precedence.
Images embedded into tracks are not supported.
The CXN v2 supports various playlist formats:
For permanent storage of favourite media selections it is recommended to use suitable software to create playlists. These can then be accessed by the CXN v2 from USB storage devices or UPnP servers that support playlist serving.
It is not currently possible to save the queue created on the CXN v2 as a playlist.
The CXN v2 USB Audio input is intended to connect directly to a PC or Mac computer.
The default CXN v2 configuration is USB Audio profile 1.0 which works with nearly all common operating systems and computer types without needing additional drivers. In this configuration sample rates from 16-bit/44.1kHz to 24-bit/96kHz are supported.
For more details on USB Audio, see our online guides at:
www.cambridgeaudio.com/USB-audio.
The two digital inputs are capable of receiving stereo PCM audio with sample rates up to 24-bit/192kHz.
The optional Cambridge Audio BT100 Bluetooth dongle can be connected into any available USB socket.
Spotify lets you listen to millions of songs – the artists you love, the latest hits and discoveries just for you. If you are a Spotify Premium user, you can control your CXN v2 using the Spotify app.
For information on how to set up and use Spotify Connect please visit www.spotify.com/connect.
The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.
To switch the audio on your device from Control Center: Swipe up from the bottom edge of any screen on your device to open Control Center. Touch and hold in the upper-right corner, then select your CXN v2.
CXN v2 comes with Chromecast built-in. It lets you stream your favorite music from your phone, tablet or laptop to your speaker.*
*Works with compatible iPhone®, iPad®, Android phone and tablet, Mac® and Windows® laptop, and Chromebook devices.
Your phone is your remote
By using your phone, there's nothing new to learn — stream your apps, your playlists, your favorite artists — without new log-ins or downloads. It's simple to browse, queue, and control from anywhere in the home.
Tap the Cast button
Simply tap the Cast button from your own mobile device to start streaming music to your speaker. Search, play, pause, and more right from your phone.*
*Device should be on the same Wi-Fi network.
100+ Chromecast enabled apps
Choose from millions of songs from popular music services like Google Play Music, Spotify, Deezer, TuneIn and 100+ more. Discover more apps at... google.com/cast/apps
Set up your speaker on your phone or tablet
google.com/cast/setup
Set-up Wi-Fi: Initiates Wi-Fi setup.
Enter network name: For manual entry of the network name.
Current config: Displays current network settings.
Edit config:
Rename the CXN v2.
For further information on USB Audio: www.cambridgeaudio.com/USBaudio.
Used when there is a clash with other products.
Note: To restore the default CXN v2 IR remote control command set, remove and reinstall the batteries without pressing any buttons.
Sets the time before entering Standby Mode after inactivity.
Allows you to customise the names of the digital inputs; USB Audio and D1 – D2.
Restores the CXN v2 to the default factory shipping state.
Note: Factory reset will delete all Wi-Fi networks and keys from memory.
WWW.CAMBRIDGEAUDIO.COM
Gallery Court, Hankey Place
London
SE1 4BB
United Kingdom
Cambridge Audio is a brand of Audio Partnership Plc.
Registered in England No. 2953313
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the CXN V2 that isn't answered in the manual? Leave your question here.